8.19.2022

easy cropping of your original comic pages for any printer dimensions

while i was formatting this chapter i just wrapped, i realized that i could save a ton of effort by doing the following in order to end up with a collection of perfectly cropped images in a specific dimension format:

1. have a copy of the original hi-res uncropped images saved in a backup folder.

2. open a new file <(i use clipstudio, but this trick is possible in photoshop)> with the dimensions set at whatever the printer requisites are and the resolution the same as your original pages.

3. select all.

4. fill selection with solid color.

5. open an original page file (this would be a copy, dont use the files from your backup folder.)

6. hit paste to import the solid color layer from earlier [this part is critical] adjust (not size, just up/down/left/right) the layer of solid color to accomodate your page contents as if it would be the finished page, that is, for left & right facing pages. you will do this trick in two passes, one for all left pages, then one for all right pages. the names will still self organize since you will simply save over the same file when finished. there are tricks to getting the double page spreads to stitch correctly, but thats covered elsewhere.

7. with only the solid color selected, hit copy again (this will copy not just the layer contents, but the layer position; ie: your finished left/right page as it would be for a given printer. i save the left & right position solid color layer seperately, you can name them anything, i call them L crop & R crop, you can see both names in the auto action photo below, but the names dont matter since you wont use both at the same time & auto action only uses layer position not name.

8. deselect all. 

9. turn off solid color layer.

10. find the auto action tool (photoshop; menu bar. clipstudio; palette menu.) & record the following sequence of steps: 1.select top layer as editing layer, 2.paste, 3.create selection of editing layer, 4.crop, 5.turn off editing layer, 6.deselect, 7.save[i personally still save manually after the auto action but i think it can be done as a step?].

11. clipstudio has the option to make this auto action a button, i think photoshop may as well depending on your version#.

12. if you copied the solid color in left page position, use this auto action on all left pages (you should be aware of your page# & corresponding page position, thats covered elsewhere.) then copy the solid color layer in the right page position (these layers should be saved for future use; left/right.) to continue using the same auto action for all the right pages. the same auto action will be used for the covers, but you will have to add the spine later, thats covered elsewhere.


so yeah, seems complicated, but once you program it to the single button press, it saves alot of time when dealing with a dozen or more pages at once, especially for different formats.

the alternative would be to adjust the page size to printer dimensions, either by inputting the number in the value boxes (still time consuming) or scaling it by hand to crop lines (risky to keep consistent). this method might also not economize the page best by reducing all sides too evenly as opposed to leaving more space in the spine or top and less on the outer edge etc.
another alternative is to import your page into a blank template of the printer dimensions & scaling/moving that to fit by hand, but thats only feasible for a handful of pages.
as long as youve been creating with page orientation in mind & using the same template since the first page, the auto action will end up faster after doing 5 or 6 pages.

depending on your printer, they may want single pages or combined pdfs, figure out which & save appropriately.
if you arent printing yourself, this is far as you need to go.

​​​​​​​if you are printing yourself, i highly recommend pdfsnake over any other 2up formatter (imposition software).








HOA ch01 is officially in print & available to order through TinyPowerComics.com for just $3 + shipping!


I do free custom sketch giveaways sometimes, add me on FB to get the alerts on your feed & your chance to request one of your own!


 

3.30.2022

My updated personal comic templates

I always try to keep an open mind, and my comic workflow is no exception. I recently had a chance to evaluate the "Story" tools in Clip Studio Paint Ex, and found several things that could potentially help with organization, consolidation, and proofing. I tested the B5 manga setting with default cropmarks against my most recent template revision, its just a little wider, but the active area was shorter.
The main reason i design my own template is to have one image that has enough bleed for ANY format (western, manga, & tradebook mainly), and does not sacrifice crucial items (text etc).

Ive just redesigned my templates again and did a few formatting tests, aside from the blue "no text" being a rule you can bend a bit, i think this template is pretty much perfect for those main printing format requisites. It also doesnt get any easier to read than this. ive removed the formal cropmarks since your formatter will most likely include some in the program anyway.




 

3.28.2022

Heirs of Ashuradō title logo

I finally got around to designing the title logo, i think i got pretty close to what i was aiming for.
Follow the story as its updated on Webtoons.com and collect the full volumes when available from TinyPowerComics.com !